Available Superseded

The documents listed below have been classified as "available superseded" which is used for documents that either:
  • may have been revised/amended but are still in force; or
  • are not entirely up-to-date but contain relevant/useful information (and therefore should not be withdrawn), but are not considered sufficiently important for industry to dedicate resources to revise/amend them.

Therefore you should always check the lists of current Communications Alliance publications to make sure that you have the latest version of a document.

ACIF C559:2003 Unconditioned Local Loop Service (ULLS) Network Deployment Rules
Defines the minimum performance requirements for broadband services on phone lines (e.g. ADSL, ADSL2+, SHDSL).
AS/ACIF S003:2006 Customer Access Equipment for connection to a Telecommunications Network
Customer Access Equipment for connection to a Telecommunications Network.
AS/ACIF S003:2008 Customer Access Equipment for connection to a Telecommunications Network
Customer Access Equipment for connection to a Telecommunications Network.
AS/ACIF S004:2004 Voice frequency performance requirements for Customer Equipment
Specifies the frequency and acoustic performance requirements for speech and tones (e.g. for distortion, loudness and acoustic shock). These requirements are for telephones that connect to the PSTN or ISDN.
AS/ACIF S004:2006 Voice frequency performance requirements for Customer Equipment
Specifies the frequency and acoustic performance requirements for speech and tones (e.g. for distortion, loudness and acoustic shock). These requirements are for telephones that connect to the PSTN or ISDN.
AS/ACIF S006:2001 Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network
Specifies requirements for non-switching telephone equipment used in businesses, e.g. equipment connected to a tie-line.
AS/ACIF S008:2001 Requirements for Authorised Cabling Products
Specifies requirements for telephone cables and cabling products (e.g. plugs, sockets, enclosures) used in customer’s premises and businesses. It does not cover cables or products used in the network by carriers.
AS/ACIF S009:2001 Installation requirements for customer cabling (Wiring Rules)
Specifies the rules for cablers must follow for the installation or repair of cables in customer premises and businesses. It does not cover cable installations in the carriers’ networks.
AS/ACIF S041:2005 Requirements for DSL Customer Equipment for connection to the PSTN
Specifies requirements for telephone equipment that connects to the Public Switched Telephone Network (PSTN) by an analogue interface (e.g. corded and cordless phones, dial up modems, answering machines, facsimile machines).
AS/ACIF S042.1:1999 Requirements for connection to an air interface of a Telecommunications Network - Part 1: General
Specifies the common requirements for mobile phones such as GSM, CDMA and WCDMA such as the ability to call the emergency call services 000, 112 and 106.
AS/ACIF S042.1:2006 Requirements for connection to an air interface of a Telecommunications Network - Part 1: General
Specifies the common requirements for mobile phones such as GSM, CDMA and WCDMA such as the dialling of emergency call services (000, 112 & 106) and acoustic safety requirements.
AS/ACIF S043.1:2001 Requirements for Customer Equipment connection to a metallic local loop interface - General
AS/ACIF S043.1:2001 specifies the technical requirements for Customer Equipment (CE) that is designed or intended for connection to a Telecommunications Network via a metallic local loop interface. This Standard does not apply to CE designed or intended for connection to HFC, coaxial cable or wireless local loop.
AS/ACIF S043.2:2005 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband
Specifies the requirements for broadband equipment connected to copper wire pairs e.g. DSL modems.
AS/ACIF S043.2:2006 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband
Specifies the requirements for broadband equipment connected to copper wire pairs e.g. DSL modems.
AS/ACIF S043.3:2001 Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network Part 3 DC, low frequency AC and voiceband
Specifies the requirements for connected to copper wire pairs that can deliver DC, and AC signals
G503:1998 Service Description - Mobile (origin) Location Indicator
G503:1998 Service Description - Mobile (origin) Location Indication withdrawn.
G526:1999 - Specification of Signalling System No 7 - Stage 1 Supplementary Description for Mobile Location Information (MOLI)
Specification of Signalling System No 7 - Stage 1 Supplementary Description for Mobile Location Information (MOLI).
G527:1999 - Specification of Signalling System No 7 - Stage 3 Supplementary Service Description for Mobile Location Information (MOLI)
Specification of Signalling System No 7 - Stage 3 Supplementary Service Description for Mobile Location Information (MOLI).